Rust Convertor

RXSOL-18-1011-020 is Exciting product treated for prevention of rusting by chemical coating. This product is Single component rust neutralizing system giving excellent adhesion to subsequent painting materials. on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective coating on the surface which also serves as an excellent base for the primer.

Deck cabin galley Maintenance-25

Rust Convertor

Part No: RXSOL-18-1050-020

Polymer based rust neutralizing system giving excellent adhesion to subsequent painting materials . on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective

Application

APPLICATION, DOSAGE & CONTROL:-

It is necessary chemically cleaned to remove old rust & scale deposits before treatment.

DIP CLEANING: -
Small parts may be dipped in an open bucket or tank-containing RXSOL-18-1011 after dipping immediately removes the metals parts from bath. Finally wash the system with water on complete drying. Acid proof gloves should be worn during the operation.

Dosage

WIPPING OR BRUSHING: -
Large components may be wiped down Rags, Sponges, or Brushes soaked in RXSOL-18-1011 .Synthetic sponges & brushes should be checked for compatibility with RXSOL-18-1011 prior to use. And finally wash the system with water after 2-3 hours on black coating , incase where RXSOL-RC-1011/B dries leaving a coat of white sludge formation wipe out with a cloth and repeat the application then allow to dry. Again wash the system with water. The surface is now ready for primer.

Rust convertor RXSOL-18-1011-025 manufacturer in india and Middle east / Gulf. We have strong distribution network in Both country. we are kept in top 10 supplier of Rust convertor RXSOL-18-1011-025 in mumbai, Navi Mumbai, Thane, Surat, Gandhidham, Manglore, Goa, Vizag Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi. And we are also exporter of RXSOL brand Rust convertor RXSOL-18-1011-025.

Technical Specification

Rust convertor RXSOL-18-1011-025 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.

Appearance	Clear Colourless Liquid
Density	g/cm3 at 20°C 1.05
Solubility	Water soluble
Drying Time	1-2 HOURS
Coverage	18-25 Sq. M/ Lts
Packaging	Order No.: RXSOL- 18 - 1011	Size (in Ltrs) 25 Ltrs

MSDS

Product Name	RXSOL-18-1011-020
Product Type	Rust Convertor

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333 / 5555 / 9999
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

Chemical Name	CAS No.	Approx. wt.%	Exposure
Vinyl Copolymer	N/E	5-6%	ACGIH-TLV - N/E OSHA-PEL -N/E
Tannic Acid	1401-55-4	1-2%	ACGIH-TLV - N/E OSHA-PEL - N/E
*2-Butoxyethanol	111-76-2	1.7%	ACGIH-TLV - 50 ppm (Skin) OSHA-PEL - 20 ppm
Ethylene Glycol	107-21-1	10 - 25 %	_______________
Mineral Oil MIXTURE	-------	60 - 80 %

RCRA REGULATED	No
CERCLA (superfund)	N/A
ALL MATERIALS IN PRODUCT ARE TSCA LISTED.
DOT Regulated	No
DOT Haz. Class	N/A
DOT Shipping Name	N/A
DOT Number	N/A

SUMMARY OF ACUTE HAZARDS	Irritation to eyes, nose, and throat; drowsiness, narcosis, tremors, and other CNS effects at high concentrations. Skin irritation, dermatitis, and defatting.
	ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS
INHALATION	Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, CNS depression, and unconsciousness.
EYE CONTACT	Watering, blurred vision, inflammation, and irritation which can result in corneal injury.
SKIN CONTACT	Irritation, dermatitis.
INGESTION	Nausea, vomiting; CNS depression; irritation of gastrointestinal tract, liver and peritoneal wall; lung congestion.
SUMMARY OF CHRONIC HAZARDS	Skin irritation, contact dermatitis, and defatting.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE	Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure.

If INHALED	If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential.
If on SKIN	Immediately wash with soap and water. Remove and wash any contaminated clothing.
If in EYES	Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation persists.
If SWALLOWED	If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.

Section IV: Fire and Explosion Hazard Data

Flash Point (Method) Bulk Liquid (TCC)	None
Flammable Limits	N/A
Extinguishing Media	N/A
Special Fire Fighting Procedures	N/A
Unusual Fire & Explosion Hazards	N/A

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED

Remove all sources of ignition. Use absorbent materials to prevent footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways, and soil. Wear protective clothing
and respiratory protection during cleanup.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING	Shake well before using. Keep away from heat, sparks and open flames.
OTHER PRECAUTIONS	Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers.

RESPIRATORY PROTECTION (SPECIFY TYPE)	In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators during soldering operations until fumes have dissipated.
VENTILATION - LOCAL EXHAUST	Acceptable
OTHER	N/A
PROTECTIVE GLOVES	Wear rubber gloves.
EYE PROTECTION	Safety glasses (ANSI Z-87.1 or equivalent)
OTHER PROTECTIVE CLOTHING OR EQUIPMENT	Chemical resistant coveralls
WORK/HYGIENIC PRACTICES	Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse.

Section III: Physical Data

Appearance & Odor	Clear liquid with a very slight 'vinyl' odour.
Boiling Point	218° F
Evaporation Rate (Water=1)	1
pH	2
Solubility In Water	Dispersible
Specific Gravity	1.01
Vapor Density (AIR=1)	N/A
Vapor Pressure	Approx. 17 mm Hg
VOC Content	22 grams/liter

Flash Point (Method)	Bulk Liquid (TCC) None
CONDITIONS TO AVOID	None
INCOMPATIBILITY (MATERIALS TO AVOID)	Oxidizers, acids and bases.
HAZARDOUS DECOMPOSITION PRODUCTS	CO, CO, and fragmented hydrocarbons.
HAZARDOUS POLYMERIZATION	Will not occur

CHRONIC HEALTH HAZARDS

No ingredient in this product is an IARC, NTP or OSHA listed carcinogen.

Ingredient Name	Oral-Rat LD50	Inhalation-Rat LC50
lauryl dimethyl amine oxide	4.3 mg/kg	N/D
Polylene Glycol Butyl Ether	N/D	N/D
Sodium Metasilicate	1153 mg/kg	N/D

Ingredient Name	Food Chain Concentration Potential	WATERFOWL TOXICITY	BOD	AQUATIC TOXICITY
lauryl dimethyl amine oxide	N/D	N/D	N/D	N/D
PolyleneGlycol Butyl Ether	N/D	N/D	N/D	N/D
Sodium Metasilicate	N/D	N/D	N/D	N/D

Waste Classification	Non-regulated liquid waste
Disposal Method	Dispose of all liquid waste in accordance with all local, state and federal regulations.

DOT	Non-Regulated
OCEAN	Non-Regulated
AIR	Non-Regulated

The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the
most up to date information. The information given in this data sheet does not constitute or replace the user's own assessment of workplace risk
as required by other health and safety legislation.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Enquire About This Product View / Download MSDS (PDF)