SEA CLEAN OIL

SEA OIL CLEAN RXSOL OIL TREAT POWER CLEANER SEA CLEANER ( Powerful Solvent Degreaser Tank cleaner ) is formulated for cleaning double bottom, deep and wing tanks used for petroleum fuel oils. Aromatic chain compound have special feature and its chain bonding in molecules are very strong, so its cleaning always required special type of cleaner. 

Our team is continiously working on daily problem faced by customer, and observed that after using of SEA OIL CLEAN OIL TREAT POWER CLEANER SEA CLEANER ( Powerful Solvent Degreaser Tank cleaner ) all oil base compound are emulsifed and cleaned out. But if tanks / vessel are required complete removal of hydrocarbon even traces, smell from tank surface then repetition of tank cleaning through RXSOL-16-1011-210 .

Directions for Use and Dose Rates SEA CLEANER: RXSOL-20-2002-050 is  specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method: For heavy soil put parts into undiluted RXSOL-20-2002-050, for general soiling use a solution of 10-30% RXSOL-20-2002-050 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method: Use neat RXSOL-20-2002-050 SEA CLEANER over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1.First of all  heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close  all suction and discharge valves .
4.1^stDose  Fill the tanks by ½ to 1 litre RXSOL-20-2002-050 SEA CLEANERper tone of water  through pipe or manhole, for 75-80% of capacity of tank to be cleaned.

5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this  temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of RXSOL-20-2002-050, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely

RXSOL-20-2002-050 SEA CLEANER is an extremely effective liquid blend of  concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for   BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms  on deck.

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat, Nairobi Africa, Canada
 

• Chemical characterization
• Description: Mixture contains: Emulsifiable liquid of Naptha   ( 20 to 30% ) Along with Butoxyethanol, Ethylene Glycol Ether ,  Emulsifying  agents as non ionic surfactants, Fatty Acid & alcohal derivative.(biodegradable substance 85 to  90%)  and Ethoxylate . And with harmless addition.

Care for environmental protection:Prevent material from reaching sewage system, holes and cellars. Dilute with much water. PROCEDURE  for cleaning/collecting:Remove RXSOL SC 2002 with absorbent materials or mechanically .And dispose accordance with section , Then flush with water and ventilate well. NOTE : Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust , oil adsorbent).

Product Properties:-

This material must be disposed with local national regulations.Product   Recommendation  ( Recommended cleaning agent  :  water ) Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations. Can be reused or recycled after cleaning

• Marine pollutant: No
• Transport/Additional information

• Hazard designation of product: Xi Irritant.
• Irritating to eyes and skin.
• Safety phrases
  Keep out reach of children
  If swallowed, seek medical attention immediately
  Harmful if swallowed
  In case of contact with eyes, rinse immediately with plenty of water and
  seek medical attention.
  Do not Breathe
  After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
  Risk of serious damage to eyes
• National regulations

These data are based on our present knowledge. However, RX MARINE INTERNATIONAL shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.