Skip to main content
Drag

Aqua Clean Tuff High Foam

Aqua Clean Tuff liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is -  Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

beams, girders, and other structure.

Aqua Clean Tuff plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.

Aqua Clean Tuff High Foam
Deck cabin galley Maintenance-25

Aqua Clean Tuff High Foam

Part No: RXSOL-25-3033-210

Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Aqua Clean Tuff liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is -  Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

beams, girders, and other structure.

Aqua Clean Tuff plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.

Application

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aqua Clean Tuff CLEANER plays very important role in washing down with use of chemicals.  Aqua Clean Tuff classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Dosage

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
 

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using Aqua Clean Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  Aqua Clean Tuff over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the Aqua Clean Tuffv has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the Aqua Clean Tuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of Aqua Clean Tuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of Aqua Clean Tuff in correct dosages is half the job done.

General Cleaning :- Aqua Clean Tuff can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aqua Clean Tuff CLEANER should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of Aqua Clean Tuff to a bucket of water. The Aqua Clean Tuff solution can be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the Aqua Clean Tuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aqua Clean Tuff is not recommended for washing machines. 


20-50 % with fresh water .             Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Technical Specification
Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch.  After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use Aqua Clean Tuff hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.
MSDS

Product Name : RXSOL-25-3033-210
Product Type : Aqua Clean Tuff

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Branch ::: Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Oman, Nairobi

Phone : +91 22 27815541 / 42
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

 

Chemical Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Potassium   Hydroxide         

10-15%

1310-58-3 

215-181-3 

35

2-butoxy ethanol

1-5%

111-76-2

203-905-0

X

 

Fatty alcohol ethoxylate

5-10%

34398-01-1

500-084-3

41

 

Di-Sodium Meta Silicate 1-5 10213-79-3 229-912-9 34,37  
Disodium cocoamphodiacatate 1-5  68650-39-5  272-043-5  36 Xi  
Cocamide DEA 1-5  68603-42-9 271-657-0    

Non classified ingredients

60-70 

 

 

 

 


Odour

Odourless

Appearance

Liquid, colourless , soluble in water

Contact with eyes

Corrosive to eyes, Can cause damage to the eyes

Contact with skin

Causes  burns (R35)

Inhalation

No information available but must be considered harmful

Ingestion

Harmful if swallowed (R22)

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash    with soap and water.Seek medical advice if necessary

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives.

Ingestion

Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.

Inhalation

Seek medical attention if ill effects occur

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)  (S45) When in doubt or symptoms persist, seek medical attention

Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding
conditions. Vapour density - not applicable.

Personal Precautions

Wear protective clothing as per section 8

Environmental Precautions

Do not allow to enter public sewers and watercourses

Clean Up Actions

Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid

Special Precautions

Wear protective clothing as per section 8

Handling

Eyewash bottles should be available.See Section 8.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

 

Exposure Limits

OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide).

Exposure controls

No special ventilation is required unless the product is used in a spray form.

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are  recommended) During fumigation/spraying wear suitable respiratory equipment (S42).

gloves              suit.               goggles               no_smoking

Gloves                     Suit.                    Goggles              No_Smoking

Odour

Odourless

Appearance

Liquid, colourless to yellow, soluble in water

pH

11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration

Boiling point

>100 °C at 760 mm /Hg

Vapour pressure

not known

Vapour density

not applicable

Freezing point

5 °C at 760 mm/Hg

Completely soluble in water

Specific gravity (water=1)

1.23

Non combustible

-  This article is considered stable under normal conditions
-  Avoid overheating, Keep away from frost
-  Incompatible with acid
-  See Section 5
 

Toxicological information

No experimental data available.

Inhalation

Can cause damage to the respiratory system.

Contact with skin

Causes severe burns (R35).

Contact with eyes

Causes severe burns (R35).

Ingestion

The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system.

Carcinogenicity

No evidence of carcinogenic effects.

 

Ecotoxicity

"In general, this cleaning agent  main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.

Mobility

Completely soluble in water

Persistence and Biodegradability

Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable.

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

No environmental problems are expected when the product is used / handled correctly. 

 

Classification

Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.

Disposal considerations

"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." 

 

Proper Shipping Name HYDROXIDE, SOLUTION
 UN        
  Proper Shipping Name Potassium hydroxide, solution    
  UN NO 1824     
  Hazard Class  Packing Group  II 
Road/Rail (ADR/RID) 
  Proper Shipping Name  Potassium hydroxide, solution    
  ADR UN No 1824     
  ADR Hazard Class  Termcard  80S1824 
Sear (IMDG) 
  Proper Shipping Name  Potassium hydroxide, solution    
  IMDG UN No 1824    
  IMDG Hazard Class IMDG Pack Group  II
  IMDG EmS  F-A, S-B  IMDG subrisk  NA 
  IMDG Labels   IMDG Flash point N/A

Air(ICAO/IATA) 

  Proper Shipping Name

Potassium hydroxide, solution

   
  ICAO UnNo 1824     
  ICAO Hazard Class ICAO Packing Group II 
  ICAO subrisk

N/A 

ICAO Labels  8, CAO 
  ICAO Flash point

N/A 

   
DOT/CFR(US Department of Transportation 
  DOT Proper Shipping Name Potassium hydroxide, solution    
  Hazardous Material  Potassium hydroxide    
  Hazard Class Identification Number  
  Product RQ (lbs) 3640  DOT subrisk

N/A 

  DOTLabels DOTFlashpoint N/A 

- Forbidden on passenger aircraft

Risk Phrases

Non Corrosive

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has
been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety
Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties
The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage
in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Classification

Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.

Disposal considerations

"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."