DCWT NON Chromate

Nitrite based closed circuit inhibitor 1000ppm at 1.00%

RXSOL LIQUID EWT is a high performance nitrite based closed circuit inhibitor with indicator. Nitrite > 1000ppm at 1.00%.It is multi-functional corrosion inhibitor for protecting recalculating cooling and heating water systems. RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-staining solution, which protects the system from corrosion and hard water scale. RXSOL LIQUID EWT treatment is approved or authorized for use by:

Deck cabin galley Maintenance-25

DCWT NON Chromate

Part No: RXSOL-25-4010-220

RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-staining solution, which protects the system from cor

Nitrite based closed circuit inhibitor 1000ppm at 1.00%

Application

RXSOL LIQUID EWT treatment is an effective corrosion inhibitor for ferrous metals in marine circulating cooling water systems. Because certain aluminum alloys are highly anodic, they may be difficult to completely protect. Therefore, the use of RXSOL LIQUID EWT treatment with systems containing aluminum alloys should be discussed with a local Rxmarine Marine representative prior to starting treatment. In order to ensure the maximum benefits from a RXSOL LIQUID EWT treatment program, the system should be inspected for deposits and corrosion. If the system is found to be contaminated, it must be chemically cleaned before the treatment program begins. Your Rx Marine representative can provide specific cleaning recommendations. Sacrificial anodes (magnesium or zinc) in the cooling system should be removed prior to adding RXSOL LIQUID EWT treatment. These materials are not necessary with the complete chemical program in effect and, in fact, may cause undesirable deposits in circulating water systems.

Dosage

The system should be filled with good quality fresh or distilled water and where freeze protection is necessary, the proper amount of glycol-based antifreeze should be added. Begin circulating the system water, and add RXSOL LIQUID EWT cooling water treatment at an initial dosage of 8 liters per ton of system water capacity. Circulate for 30 minutes after addition to ensure good distribution and the establishment of a protective film. RXSOL LIQUID EWT cooling water treatment may be used with waters that have hardness contamination, provided the total hardness levels are less than 170 ppm or as otherwise recommended by the engine manufacturer, whichever is less. The chloride level in the cooling system should be limited to 100 ppm or as otherwise recommended by the engine manufacturer, whichever is less.

Technical Specification

Appearance	Light yellow liquid
Specific Gravity at 25° C (77° F)	1.23
Flash Point (PMCC)	None
pH, Neat	12.3 - 12.9
Freeze Point:	-12.2° C (10° F)
Freeze/Thaw Stability	Complete

MSDS

Product Name	:	RXSOL-40-4010-0210
Product Type	:	Engine Water Treatment 210 Ltr

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	:	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	mail@rxmarine.com
Website	:	www.rxmarine.com

Chemica Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
Sodium nitrite	10-30	7632-00-0	231-555-9	8, 25, 50	T, O,N
Sodiumtetraborate 10 aq	1-5	1303-96-4	215-540-4	62,63	Xn
Benzothiazol-2-thiol	0.1-.02	149-30-4	2299129	34,37	O

Sodium Hydroxide 1 - 5 % 0 0 13 1 0 -7 3 -2

Bo rax 5 %                        1 33 0 -4 3 -4
Sulphonated Polymer                1-5%                       Not listed
Benzotriazole                               <1%                        95147
Dichlorophen                              <1%                       2025671

*See Section 16

Odour	Odourless
Appearance	Pale Yellowis to Clear Liquid, soluble in water
Contact with eyes	May cause pain
Contact with skin	In cases of severe exposure, severe irritation may develop
Inhalation	Vapours or aerosols may cause irritation of eyes, nose and respiratory tract
Ingestion	Toxic if swallowed (R25)

Contact with skin	Remove contaminated clothing immediately and drench affected skin with plenty of water Contaminated clothing should be laundered before reuse When in doubt or symptoms persist, seek medical attention
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention
Ingestion	Never make an unconscious person vomit or drink fluids Give water or milk to drink Induce vomiting (only if patient is conscious) Obtain immediate medical attention
Inhalation	Inhalation is unlikely to occur Remove patient to fresh air When in doubt or symptoms persist, seek medical attention
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

- Nitrogen oxides may be formed
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
- Substance evolves toxic fumes, wear self-contained breathing apparatus

Personal Precautions	Wear protective clothing as per section 8
Environmental Precautions	Do not allow to enter public sewers and watercourses
Immediate Actions	Use appropriate containment to avoid environmental contamination (S57)
Clean Up Actions	Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete
Special Precautions	Wear protective clothing as per section 8

Handling	Wear protective clothing as per section 8 Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from heat Protect from frost

Exposure controls	No special precautions are required for this product
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended)

Odour	Odourless
Appearance	Pale yellowish to clear Liquid, soluble in water
pH	8.5 - 9.5 at 100 % concentration
Boiling point	>100 °C at 760 mm /Hg
Vapour pressure	not known
Vapour density	not applicable
Freezing point	<0 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	1.10

-   This article is considered stable under normal conditions
-   Avoid contact with acid
-   Incompatible with acid, Contact with acids liberates toxic gas (R31)
-    See Section 5

Toxicological information	No experimental data available
Inhalation	Not applicable
Contact with skin	In cases of severe exposure, severe irritation may develop
Contact with eyes	May cause severe irritation May cause pain
Ingestion	Toxic if swallowed (R25)
Carcinogenicity	No evidence of carcinogenic effects

Ecotoxicity	This product contains components which are classified in the EU as dangerous for the environment. May cause acute effects in the aquatic environment
Mobility	Completely soluble in water
Persistence and Biodegradability	Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable.
Bioaccumulation Potential	Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment.

Classification	EU Waste class: 06.03 This material and/or its container must be disposed of as hazardous waste
Disposal considerations	Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

- Not classified as hazardous for transport

Classification and labeling	Contains Benzothiazol-2-thiol. May produce an allergic reaction. Cooling Water Treatment 15 Regulatory information (....)
Risk Phrases	Toxic if swallowed (R25)
Safety Phrases	Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) This material and its container must be disposed of in a safe way (S35)

Text of R and S phrase codes used in this safety data sheet:- R25: Toxic I f swallowed; R43: May cause sensitisation
by skin contact; R50: Very toxic to aquatic organisms; R50/53: Very toxic to a quatic organisms, may cause long-term adverse effects in the aquatic environment; R62: Possible risk of I mpaired fertility; R63: Possible risk of harm to the unborn child; R8: Contact with combustible material may cause fire.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application (s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Enquire About This Product View / Download MSDS (PDF)