Marine Growth Cleaner
Part No: RXSOL-25-4038-025
Cleaning agent can perfectly clean off all kinds of marine fouling such as sticky matter and ooze attached to the surface of the plate without disassembling the plate heat exchanger.
RXSOL-25-4038-025 cleaning agent can perfectly clean off all kinds of marine fouling such as sticky matter and ooze attached to the surface of the plate without disassembling the plate heat exchanger.
RXSOL-25-4038-025 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.
Marine Growth Cleaner is an environmentally friendly, biodegradable, and non-toxic solution designed for the safe and effective removal of marine growth. Specially formulated for use on seawater-cooled equipment such as condensers, heat exchangers, and keel coolers, it provides a powerful alternative to harsh acids like muriatic acid—without fumes or foaming.
Marine Growth Cleaner easily dissolves barnacles, zebra mussels, rust, calcium, lime, and other mineral deposits. It can be re-circulated through systems without causing damage to equipment. The Ready-to-Use formula requires no dilution, making it a simple and reliable choice for both preventive maintenance and deep cleaning.
Application
RXSOL-25-4038-025 marine growth cleaner Antifouling Liquid ensures the cleanliness of the heat exchange equipment, by dispersing the sediments and deposits of dissimilar substances falling into the system of water supply from the environment, such as sludges, sand, oil products, clays. The Rxsol Antifouling Liquid the removal from the water supply system of dead organic materials, of natural origin, and enhances the action of microbiocides (oxidizing and non-oxidizing). Rxsol Antifouling Liquid is a weakly foaming compound and has a thermal stability, even at high temperatures (<+ 120 0 C).
Rxsol Antifouling Liquid reduces the risk of Legionella Pneumophilla bacteria by effectively removing biofilms in the water supply system. When used in sterilizers and autoclaves, the reagent provides clean and shiny surfaces near the loaded glass containers, by emulsifying fats, oils, proteins and other organic residues.
- A/C & Refrigeration cooling Systems
- Engines Seawater Cooling Systems
- Heat Exchangers
- Bow Thrusters
- Water Makers
- Sea Strainers
- Propellers
- Seacocks
- Pumps
- Piping
- Hulls
Dosage
- Circulate product through the system using a pump.
- Allow it to run for 2–6 hours depending on the severity of fouling.
- Flush system with clean water after treatment.
- Repeat as necessary for heavily fouled systems.
RXSOL Antifouling Liquid may be supplied, directly from the product tank, or as an aqueous solution, to any suitable point in the water supply system. The exact dosage of Rxsol Antifouling Liquid will depend on a number of factors, such as the nature and concentration of suspended solids in the water, and the already existing degree of contamination of the internal surfaces. Preventive control of the technical state of the water supply system can be provided by dosing the reagent in the range 25-100 mg / l in continuous mode, or in a batch mode by the impact method. In water systems that are seriously polluted, the reagent should be cleaned in a concentration range of 1000 to 5000 mg / l. To receive special recommendations, customers should contact the official representatives of Rx Marine International .
A suitable option, for specific heat exchange equipment, can be the equipment of local reagent injection points on incoming pipelines.
Technical Specification
Physical Proeprties :
| Appearance | : Clear or slightly Turbid aqueous solution, colorless or slightly yellow in color |
| Density (kg / m 3 ) | :1170 |
| pH | : Acidic |
| Flash Point | : None |
| Freezing Point | : <+ 2 0 C |
| Solubility in Water |
: Cpmpletely soluble in water |
MSDS
| Product Name | RXSOL-25-4038-025 |
| Product Type | Marine Growth Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point: Dubai, Muscat, Kenya, Uganda, Mumbai, Kandla, Vizag, Kolkata, Chennai
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Components | CAS-No. | Percentage | EINECS-No. | Concentration | Symbol(s) | R-phrase(s) |
|
Sodium Oleate |
143-19-1 | 2-5 | 205-591-0 | >=2.5 - <5 | Xi | R36/38 |
| Propritary Blend | -- | 95-98 | -- | -- | -- | -- |
Does not content any hazardous data
|
General Information |
First aid is not normally required. If symptoms develop, seek medical attention. |
| Eyes | Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or persists.Remove contact lenses. |
|
Skin |
Take off contaminated clothing and shoes immediately. Wash off immediately with plenty of water. |
|
Ingestion |
Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Consult a physician if necessary. |
| Inhalation | Move to fresh air. If symptoms persist, call a physician. In case of shortness of breath, give oxygen. |
|
Suitable extinguishing media |
ABC powder, Dry chemical, Water mist, Carbon dioxide (CO2) |
|
Unsuitable extinguishing media |
DO NOT USE: Halons |
| Hazardous combustion products | carbon dioxide and carbon monoxide |
|
Thermal decomposition |
no data available |
|
|
Do not allow run-off from fire fighting to enter drains or water courses. Keep containers and surroundings cool with water spray. Prevent fire extinguishing water from contaminating surface water or the ground water system. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. |
| Personal protective equipment | In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. |
SECTION VI: TOXICOLOGICAL DATA
| Personal precautions |
Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. |
|
Environmental precautions |
Prevent further leakage or spillage if safe to do so. Methods for cleaning up |
|
Methods for cleaning up |
Neutralise with acid. Large spills should be collected mechanically (remove by pumping) for disposal. Keep in suitable, closed containers for disposal. |
| Other information | Comply with all applicable federal, state, and local regulations. |
| Handling | Do not breathe vapours or spray mist. For personal protection see section 8. Avoid exceeding of the given occupational exposure limits (see section 8). Smoking, eating and drinking should be prohibited in the application area. No special handling advice required. Normal measures for preventive fire protection. |
| Storage |
Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Stable under recommended storage conditions. Protect from frost. |
Exposure Guidelines
|
General advice |
These recommendations provide general guidance for handling this product. Personal protective equipment should be selected for individual applications and should consider factors which affect exposure potential, such as handling practices, chemical concentrations and ventilation. It is ultimately the responsibility of the employer to follow regulatory guidelines established by local authorities. Ensure that eyewash stations and safety showers are close to the workstation location. Always have on hand a first-aid kit, together with proper instructions. |
|
Exposure controls |
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below level of overexposure (from known, suspected or apparent adverse effects). |
|
Eye protection |
Safety glasses with side-shields |
|
|
|
| Wear as appropriate | Safety shoes |
| Wear resistant gloves such as | Nitrile rubber |
| Respiratory protection | No personal respiratory protective equipment normally required. |
|
Physical |
liquid |
|
Form |
Aqueous solution |
|
Colour |
colourless |
|
|
no data available |
| Boiling point/boiling range | 100.00 °C @ 760.00 mmHg |
| Melting point/range | no data available |
| pH | (+/- 1.8) 10.5 |
| Flash point | no data available |
| Evaporation rate | (>) 1 (Ethyl Ether) |
|
Lower explosion limit/Upper explosion limit |
2.6 %(V) / 12.6 %(V) |
| Vapour pressure | 17.50 mmHg @ 68.00 °F |
| Vapour density | (>) 1 (AIR=1) |
| Density | (+/- 0.01) 1.010 g/cm3 @ 68 °F / 20 °C |
| Solubility Water | soluble |
| Partition coefficient: n-octanol/water | no data available |
| log Pow | no data available |
| Autoignition temperature | no data available |
| Viscosity, dynamic | no data available |
| Viscosity, kinematic | no data available |
|
Stability |
No hazards to be specially mentioned. |
| Conditions to avoid |
None known. |
|
Incompatible products |
Strong oxidizing agents |
|
Hazardous decomposition products |
carbon dioxide and carbon monoxide |
| Hazardous reactions | Hazardous polymerisation does not occur. |
|
Exposure routes |
Skin contact, Eye Contact, Ingestion | |
| Eye contact |
May irritate eyes. |
|
|
Skin contact |
May irritate skin. |
|
|
Ingestion |
Not known to be harmful if swallowed. | |
| Inhalation | Not known to be harmful if inhaled. | |
| Aggravated Medical Condition | Preexisting disorders of the following organs (or organ systems) may be aggravated by exposure to this material: lung (for example, asthma-like conditions) | |
| Symptoms | Signs and symptoms of exposure to this material through breathing, swallowing, and/or passage of the material through the skin may include: stomach or intestinal upset (nausea, vomiting, diarrhea), irritation (nose, throat, airways) | |
| Target Organs | no data available | |
| Component data | ||
| Acute oral toxicity | ||
| Sodium oleate | no data available | |
| Acute inhalation toxicity | ||
| Sodium oleate | no data available | |
| Acute dermal toxicity | ||
| Sodium oleate | no data available |
|
Product information |
96 h LC 50 Oncorhynchus mykiss (rainbow trout) static test: 412.0 mg/l Information given is based on data on the components and the ecotoxicology of similar products. 96 h LC 50 Pimephales promelas (fathead minnow) static test: 65.9 mg/l |
| Aquatic toxicity | 48 h LC 50 Daphnia magna (Water flea) static test: 116.6 mg/l Information given is based on data on the components and the ecotoxicology of similar products. |
|
Environmental fate and pathways |
|
|
Biodegradation |
|
| BOD5 |
260,000 mg/l Based on a similar product formulation. |
| COD |
610,800 mg/l Based on a similar product formulation. |
| Bioaccumulation | The bioaccumulation potential cannot be determined. |
|
Waste disposal methods |
Dispose of in accordance with the European Directives on waste and hazardous waste. Container hazardous when empty. Dispose of in accordance with local regulations. |
| Empty packaging | Empty remaining contents. |
|
European Waste Catalogue |
The Waste code should be assigned in discussion between the user and the waste disposal company. |
|
ADR |
Not dangerous goods |
| ADNR | Not dangerous goods |
|
RID |
Not dangerous goods |
| INTERNATIONAL MARITIME DANGEROUS GOODS | Not dangerous goods |
| INTERNATIONAL AIR TRANSPORT ASSOCIATION - CARGO | Not dangerous goods |
| INTERNATIONAL AIR TRANSPORT ASSOCIATION - PASSENGER |
Not dangerous goods |
Dangerous goods descriptions (if indicated above) may not reflect quantity, end-use or region-specific exceptions that can be applied. Consult shipping documents for descriptions that are specific to the shipment.
|
Product Use Description |
professional use |
| Hazard symbols | none |
|
R-phrase(s) |
|
| S-phrase(s) | |
| Contains |
|
Full text of R-phrases referred to under sections 2 and 3 |
|
| R36/38 | Irritating to eyes and skin. |
The information accumulated herein is believed to be accurate but is not warranted to be whether originating with the company or not. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. This MSDS has been prepared by Ashland's Environmental Health and Safety Department (+31 10 497 5000).
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.