Varanasi Chemical

Product Short Description: Citric Acid Liq solution for industrial descaling and derusting cleaning application.

Product Technical Specification:

Remarks:

Citric Acid is a water treatment chemical used as pH control and for the removal of iron and other elements from fouled water softeners. Removes hard water built up, scale and lime. Citric Acid 50% Solution is used as a preservative, acidifier, chelator, and flavoring in various sections of the food and beverage industry.

PRODUCT SAFETY INFORMATION Keep containers tightly closed when not in use. Avoid contact with skin, eyes, and clothing. Avoid breathing vapors or mists. Remove contaminated clothing and wash thoroughly after handling. Hand protection: Use of gloves impermeable to the specific material handled, if necessary Eye protection: Chemical goggles or safety glasses. Face shield, if necessary Respiratory protection: Wear a NIOSH approved or equivalent dust respirator, if necessary DOT CODE GHS CODE Acute Toxicity, Dermal Category 5 Skin Irritation Category 3 Eye Irritation Category 2A HMIS CODE N/A

PHYSICAL PROPERTIES INFORMATION Physical state: Liquid Color: Clear colorless liquid Odor: Odorless pH: 2.2 (0.1 N sol) Specific Gravity: 1.24 – 1.26 STORAGE INFORMATION Keep container(s) tightly closed. Store this material in cool, dry, well ventilated areas. Protect container(s) against physical damage. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid). Shelf life: Stored under controlled conditions 1 year.

DELIVERY Containers: 55 Gal Plastic drums / 250 Gal Tote bin / Bulk tank trucks. NOTE Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this technical data sheet are based on information believed to be reliable. However, the use of the product is beyond our control, and no guarantee expressed or implied is made as to the effects of such the results to be obtained id not used in accordance with directions or established safe practice. The buyer must assume all responsibility including injury or damage, resulting from misuse of the product as such, or combination with other materials. Issue date: March 1, 2016

Images:

Potassium Chloride

Product Short Description: Potassium Chloride Exporter, Manufacturer

Product Technical Specification:

Appearance White free flowing crystalline powder

Density 1.98 SG

Bulk Density 71 to 78 Ib/ ft³

Aqueous Solubility Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity 98.83%-99%

K20 62% and above

Remarks:

Product Details:

Color White

Grade Standard Reagent Grade, Technical Grade

Packaging Size 50kg

Packaging Type HDPE bags

Physical State Powder, Granules, Crystals

Usage Industrial

Purity 99%

Images:

Methyl Diethanolamine MDEA

Product Short Description: A colorless to yellow liquid tertiary amine compound with an ammonia-like odor. It is completely soluble in water.

Product Technical Specification:

Property	Value
Property	Value
Physical state	Liquid
Color	Colorless
Odor	Ammonia-like
Density	1.04 g/cm @ 20°C
Melting / boiling point	-21.3 / 243.3 °C
Explosive properties	No data available
Self-ignition temperature	280 °C
Vapor pressure	0.1 hPa @ 54.8°C
Mol weight	119.16 g/mol
Water solubility	Soluble
Flash point	138°C


Molecular Formula	C5H13NO2
Molecular Weight	119.16 g/mol
Autoignition Temperature	280 °C
Critical Pressure	37 000 hPa
Critical Temperature	404 °C
Dissociation constant	25°C 8.68
Freezing Point	21.3 °C
Heat Capacity	20°C 1.72 kJ/kg·K
Heat of Formation	91 649 kJ/kmol
Heat of Vaporization	418.7 kJ/kg
Octanol-water partition coefficient, log Pow (pH 10.5; at 23°C)	1.16
Refractive Index	20°C 1.4642
Vapor Density	(air = 1) 4
Vapor Pressure	20°C 0.0031 hPa
Viscosity	20°C 99.05 mm2

Remarks:

Future & Benefit :

Degradation resistance
High solvent loading
Low capex and opex
Low corrosiveness
Low energy requirements
Low solvent make-up Selectivity

Compatibility and Solubility:

Methyl Diethanolamine is miscible in all proportions with water. It is also soluble in most organic solvents. Chemically it acts as both a tertiary amine and an alcohol. Neutralisation of the amino function by acids results in salt formation. The product is stable at elevated temperatures but must be kept away from oxidants and acids.

Amine Gas Treatment Unit system simulation:

Based upon feed gas conditions, the installation design and type of amine, unit performance can be predicted and optimized. The simulation output and reporting are tailored towards your needs and focus on the issues at hand. These simulations combined with our application experience allow us to provide you with feedback on how to improve the amine gas treatment unit operations (financial, operational and quality) and to tailor our amine formulations to maximize performance, such as energy reduction and reduced amine consumption.

Technical support:

Technical support is provided to all RXSOL users. Our experienced team of engineers is available around the clock to respond to your questions. On-site troubleshooting by an experienced engineer can also be arranged. Rxsol Chemo Pharma International can assist you with root cause analysis and operational recommendations for issues such as off- spec treated gas, foaming, high amine losses, high energy consumption, under capacity, corrosion etc.

Amine analysis:

Detailed chemical analysis of your amine solution is a key tool to determine the overall quality of the system and identify the root cause for problems such as foaming, corrosion, off spec product etc.RXSOL’s lab, highly experienced in amine analysis and interpretation, is at your disposal. Analysis of lean amine samples includes (a.o): sample appearance, physical-chemical properties, determination of free and bonded amine, acid gas loading foam test, metal scan etc. The results of the analysis are interpreted by our specialist team and the necessary recommendations are provided. The frequency, content and reporting of the analyses is customized towards your needs. Full results are typically available within 7 working days after receipt of the samples.

Sample kits :

Sample shipping kits and detailed analytical procedures are available to our customers upon request.

Packaging

Bulk
Plastic drums (230 kg net)
IBC containers (1150 kg net)

Storage:

Copper and copper alloys should be avoided.For bulk storage a nitrogen atmosphere is necessary to prevent the absorption of moisture and discoloration.

Images:

Corrosion Inhibitor CRSN 1044

Product Short Description: Is a highly effective oil an water phases corrosion an fulling inhibitor oil soluble and water dispersible film forming type it is free of heavy metals or other catalysis poisons.

Product Technical Specification:

TYPICAL DATA-

Aspect brown liquid

Density 0.915+0.01 gr/cc

Viscosity <50cPs

Flash Point >62

Pour Point <30

Solubility in hydrocarbons and organic solvents

Shelf life 24 months,min.

HANDLING

Avoid contact with skin and eyes. Avoid prologed breathing of vapours. In case of contact flush with plenty of water. Keep drums away from heat and open flames. Store in a cool area. Further information are detailed on the safety data sheet. Product is compatible with stainless steel, carbon steel and plastic materials.

Remarks:

Images:

Degreaser SC

Product Short Description: Well balanced alkaline Industrial and Institutional cleaner. It is free hydrocarbon solvents.Gentle & sutable for tank cleaning operation. A very strong alkaline cleaner, which can be used to soften up / remove baked on drying oils and also used afte

Product Technical Specification:

Removes grease, oil, carbon deposits, soil and grime.
Keeps loosened deposits in suspension preventing re-deposition.
Low toxic, Non-flammable.
Free from hydrocarbon solvents.
Effective and economical in use , Water-based cleaner.
RXSOL-81-2015-025 has numerous cleaning applications including removal of greases, waxes,
oil, sludge, soot, carbon deposits and general dirt and grime.
Non-corrosive to ferrous metals. Suitable for all tank-coatings.
Can be used for gas and hydrocarbon freeing of tanks.
Can be used for deodorizing
Contains wetting agents.

NOTE : Acts as an acid-neutralizing agent.

Remarks:

Degreaser SC Liquid Alkaline Cleaner is a blend of Silicate, alkaline detergents, water conditioners, and biodegradable wetting and penetrating agents.

We are Degreaser SC Alkaleen liquid Tank Cleaners manufacturers in india. And holding no-1 position for Degreaser SC Alkaleen liquid Tank Cleaners suppliers in kandla, mundra, chennai, ennore, vizag, kakinada, jnpt, manglore, kolkata, haldia, paradip, dubai, fujairah, sharjah. Alkaleen Liquid Heavy Duty concentration makes surface clean easily and effectively.

Images:

Potassium Chloride

Product Short Description: Potassium Chloride Exporter, Manufacturer

Product Technical Specification:

Advantage :
• Widely used in the industry
• Largely benign salt; solutions are neutral pH
• Does not significantly impair performance of polymers such as viscosifiers and filtration controllers

Remarks:

Appearance White free flowing crystalline powder

Density 1.98 SG

Bulk Density 71 to 78 Ib/ ft³

Aqueous Solubility Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity 98.83%-99%

K20 62% and above

Images:

Copper Slag

Product Short Description: Copper Slag

Product Technical Specification:

We have copper slag in six grades from Turbo+ to HD+ with different particle size. The user has the option to choose the appropriate grade based on the cleanliness level (SA2, 2½ & 3) and anchor profile (40-120 microns) requirements.
Copper slag is most commonly used as blasting agent in heavy industries, shipyards, oil & gas companies, paint manufacturers, coating contractors, tank builders, pressure vessel fabricators, off shore yards, construction chemical manufacturers and all major industries.

Remarks:

Copper Slag uses:

In addition to abrasives, copper slag is also used for making abrasive tools, roofing granules, cutting tools, tiles, glass, road-base construction, railroad ballast, asphalt pavements & in the cement and concrete industries. Copper slag partially replaces aggregates in concrete, currently, more than 75% volume of concrete contains aggregates. The use of copper slag in cement and concrete provides potential environmental as well as economic benefits for all related industries.

Images:

BORAX Anhydrous

Product Short Description: Borax Anhydrous easily solubile in water and have property to soften hard water

Product Technical Specification:

COA

Product Name	Borax Anhydrous
Number of Analysis	T0004371

Tests	Requirement	Result	Unit	Standard remark
Appearance	White or almost white, crystalline powder, colourless crystals or crystalline masses, efflorescent	Conform
Particle size	>= 90% < 250μm	96	%	Sieveanalysis
Particle size	>= 80% < 200μm	90	%
Identification A	Green border	Conform		Borium
Identification B	Conform	Conform
Identification C	Conform	Conform		Sodium
Appearance of solution	Clear and colourless	Conform		4%m/V H2O
pH	9,0 - 9,6	9,2		4%m/V H2O
Sulfates	<= 50	Conform	ppm
Ammonium	<= 10	Conform	ppm
Arsenic	<= 5	Conform	ppm
Calcium	<= 100	Conform	ppm
Assay Disodium tetraborate decahydrate	99,0 - 103,0	100,1	%
Metallic residues	CHMP/ICH/353369/2013	Conform		DP
Residual solvents	CPMP/ICH/82 260/06	Conform		DP
TSE/BSE-statement	No contamination with TSE/BSE-risk materials	Conform		DP

Remarks:

Images:

Demulsifier Premium

Product Short Description: Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.

Product Technical Specification:

Physical Data:

Physical appearance	Clear free flowing brown colour homogeneous liquid
Active Ingredient	More then 40 Percent
Specific Gravity @ 25° C	0.92 ± 0.02
Viscosity @ 25° C	< 30 cps [cst]
Pour Point	< 0° C
ph range	5.0 – 8.0
Solubility in Hydrocarbons	Soluble
Solubility in water	Insoluble
Flash point ° C	>60° C
Shelf Life	Minimum two years
Packing	210 Ltrs.
Storage Condition	-15 to 55 Degree C

Remarks:

Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water

Specifications Demulsifies

Coulour yellow to brown

PH ( concentrated product 5 to 7

Melting / freeze point < -30 c

Flash point at 38 c > 40 c

Density ( 0.90 to 0.96)

Pour point = -15 c

Viscosity = 15 to 60 cst of 40

Images:

Error message

Citric Acid Liq

Calcium Carbonate

Potassium Chloride

Methyl Diethanolamine MDEA

Corrosion Inhibitor CRSN 1044

Degreaser SC

Potassium Chloride

Copper Slag

BORAX Anhydrous

Demulsifier Premium

Who's online

24×7 Support

Tank cleaning tips

Find us

Drilling Fluids & Mud Oil Field chemicals-81

Error message

Who's online