Redkleen RX 400 Radiator Flush Cleaner
Part No: RXSOL-40-4051-025
it can act as an coagulant, flocculant, precipitant and emulsion breaker. As coagulant and flocculant, aluminum sulfate successfully removes turbidity, suspended solids and colloidal color,reduces biochemical oxygen demand (BOD) and extremely clarifi
Its wide range of usage is in water treatment, because it can act as an coagulant, flocculant, precipitant and emulsion breaker. As coagulant and flocculant, aluminum sulfate successfully removes turbidity, suspended solids and colloidal color,reduces biochemical oxygen demand (BOD) and extremely clarifies potable, process and wastewaters.
Application
Also used as foam fire extinguisher
Aluminium sulfate reacts with sodium bicarbonate to which foam stabilizer has been added, producing carbon dioxide for fire extinguishing foam.
The carbon dioxide is trapped by the foam stabilizer and creates a thick foam which will float on top of hydrocarbon fuels and seal off access to atmospheric oxygen, smothering the fire. Chemical foam was unsuitable for use on polar solvents such as alcohol, as the fuel would mix with and break down the foam blanket. The carbon dioxide generated also served to propel the foam out of the container, be it a portable fire extinguisher or fixed installation using hoselines. Chemical foam is considered obsolete in the United States and has been replaced by synthetic mechanical foams, such as AFFF which have a longer shelf life, are more effective, and more versatile, although some countries such as Japan and India continue to use it.
In the construction industry, it is used as waterproofing agent and accelerator in concrete.
Dosage
- For the production of Aluminum salts, Soaps and Aluminum Hydroxide Gel. - As a Catalyst in Ethane Production.
- Textile industry.
- Paper production.
- For the production of Glycerin
- As a Foaming Agent in Fiber Foams.
- As a Clearing Agent for Fats and Foams. - In sugar industry.
Technical Specification
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
MSDS
| Porduct Name | ALUMINIUM SULPHATE |
| Part Number | RXSOL-40-1904-025 |
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Weight | Formula |
| Aluminum sulfate | 10043-01-3 | 233-135-0 | 342,15 g/mol | Al2O12S3 |
| Signal Word | Danger |
| Hazard Statements | H290 May be corrosive to metals. H318 Causes serious eye damage. |
| Precautionary statements | P234 Keep only in original packaging. P280 Wear eye protection/ face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P390 Absorb spillage to prevent material damage. |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher |
| General advice | Show this material safety data sheet to the doctor in attendance |
| If inhaled | After inhalation: fresh air. |
| Eye Contact | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| Swallowed | After swallowing: fresh air. Make victim drink |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| Inhalation | No data available |
| Ingestion | No data available |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | No data available |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Sulfur oxides Aluminum oxide Not combustible. Ambient fire may liberate hazardous vapours. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8 |
| Spillage |
No data available |
| Personal Protection | No data available |
| Enviromental Precaution | Do not let product enter drains. Risk of explosion. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area. |
| Reference to other sections | For disposal see section 13. |
| Advice on protection against fire and explosion | No data available |
| Incompatible materials | No data available |
| Hygiene measures | No data available |
| Advice on safe handling | No data available |
| Conditions for safe storage, including any incompatibilities | Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Moisture sensitive. |
| Storage conditions | No metal containers. Tightly closed. Dry. hygroscopic Store under inert gas |
| Storage class | Storage class (TRGS 510) 8B Non-combustible, corrosive hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |
| Exposure controls |
Personal Protective equipment. |
| Engineering Control | No data available |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Body Protection | Protective Clothing. |
| Skin protection | No data available |
| Respiratory protection |
Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Other Protection Measure | No data available |
| Control of environmental exposure | Do not let product enter drains. Risk of explosion. |
| Physical state | Powder |
| Colour | White |
| Odour | Odorless |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | 770 °C - dec. |
| Boiling Point | 112 - 116 °C |
| Flash Point | No data available |
| Evaporation Rate | Not data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | No data available |
| Density | 2,71 g/mL at 25 °C - lit. |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | ca.0,00001 g/l at 21,5 °C - insoluble |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | Air Exposure to moisture |
| Incompatible materials |
No data available
|
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 401) Inhalation: No data available LD50 Dermal - Rabbit - male and female - > 5.000 mg/kg (OECD Test Guideline 402) |
| Skin corrosion/irritation | Skin - Rabbit Result No skin irritation - 4 h (OECD Test Guideline 404) |
| Serious eye damage/irritation | Eyes - Rabbit Result: Irreversible effects on the eye (OECD Test Guideline 405) |
| Respiratory or skin sensitization | Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) |
| Carcinogenicity | No data avialable |
| Germ cell mutagenicity | Test Type Ames test Test system Escherichia coli/Salmonella typhimurium Metabolic activation with and without metabolic activation Method: OECD Test Guideline 471 Result: negative Test Type: In vitro mammalian cell gene mutation test Test system mouse lymphoma cells Metabolic activation with and without metabolic activation Method OECD Test Guideline 476 Result:negative Test Type: Micronucleus test Test system Human lymphocytes Metabolic activation with and without metabolic activation Method OECD Test Guideline 487 Result: negative Test Type: Micronucleus test Species Rat Application Route Oral Method OECD Test Guideline 474 Result negative (in analogy to similar products) The value is given in analogy to the following substances: aluminium hydroxide Species: Rat Application Route: Oral Cytogenetic analysis |
| Reproductive toxicity | No data availalble |
| Specific target organ toxicity - single exposure |
Mixture may cause respiratory irritation.
|
| Additional Information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Repeated dose toxicity - Rat - male - Oral - NOAEL (No observed adverse effect level) - 18 mg/kg - LOAEL (Lowest observed adverse effect level) - 90 mg/kg Remarks: (in analogy to similar products) The value is given in analogy to the following substances: aluminium(III) chloride, anhydrous RTECS: BD1700000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Persistence and degradability | The methods for determining biodegradability are not applicable to inorganic substances |
| Toxicity to fish | Semi-static test LC50 - Danio rerio (zebra fish) - > 87,5 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | Static test EC50 - Daphnia magna (Water flea) - > 200 mg/l - 48 h (OECD Test Guideline 202) |
| Toxicity | No data available |
| Toxicity to bacteria | Static test EC50 - activated sludge - > 200 mg/l - 3 h (OECD Test Guideline 209) |
| Toxicity to algae | Static test ErC50 - Pseudokirchneriella subcapitata (microalgae) - 0,24 mg/l - 72 h (OECD Test Guideline 201) |
| Products Biodegradation | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher |
| Other adverse effects | No data available . |
| Product | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID:3260 IMDG:3260 IATA:3260 |
| UN proper shipping name | ADR/RID:CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (aluminium sulfate) IMDG:CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (aluminium sulfate) IATA:CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (aluminium sulfate) |
| Transport hazard class(es) | ADR/RID: 8 IMDG:8 IATA:8 |
| Packaging group | ADR/RID: Ill IMDG: llI IATA:Ill |
| Environmental hazards | ADR/RID:No IMDG:No IATA: No |
| Special precautions for user | Tunnel restriction code (E) |
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | A Chemical Safety Assessment was not carried out for this substance. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |