Mark Ship Chandler:


Boiler Water Sludge Conditioner

Size:

Color:

Product Short Description: Product to be used in situations where the boiler water is contaminated with oil. This high performance product is applicable to both medium and low-pressure steam boilers in order to prevent sludge deposits.
Product Technical Specification:

This is a white high molecular weight solution. It is hydrophilic and of low causticity.
Appearance / Color : White, viscous liquid 

pH : 8
Odor : Odorless 
Remarks:

Our others valauable Products : 
BOILER TREAT ONE SHOT
Combined Boiler Water Conditioner

A one-product treatment for all auxiliary boilers including waste heat, and exhaust gas boilers. it prevents scale formation, inhibits corrosion and conditions sludge.

HARDNESS CONTROL
Boiler Water Conditioner

Added to the boiler water to maintain optimum phosphate level, which prevents calcium and magnesium hardness salts formation. The precipitate can be removed by blow-down.

ALKALINITY CONTROL
Boiler Water Conditioner 

Added to the boiler water to maintain optimum alkalinity level to prevent corrosion. Due to this, Ca and Mg hardness salts cannot form and the precipitate is removed by blow-down.

HYDRAZIDE
Oxygen Scavenger 
Used for rapid removal of oxygen in boiler feed water and condensate systems, which prevents corrosion. It is the alternative for hazardous and potentially carcinogenic products.

BOILER TREAT COMBI
Organic Boiler Water Treatment 
Special blended low molecular weight compounds that elevate boiler water pH to levels, which reduce corrosion. It also prevents under deposit corrosion caused by excess alkalinity.

LIQUID COAGULANT
Oil and Sludge Conditioner 

Used to prevent formation of adherent deposits and sticky sludge in boilers,which are then removed by normal blow-down. It can also be used in the event of an oil contamination.

CONDENSATE CONTROL
Steam and Condensate Conditioner 

Injected into the condensate pump to prevent corrosion in steam and condensate lines.It’s also used to protect idle boilers from corrosion. It neutralizes acidic conditions in condensate systems and volatilizes with steam.

COOL WATER TREAT NCLT
Corrosion and Scale Inhibitor 
Provides an effective anodic inhibitor treatment and protects ferrous and non-ferrous metals. It deposits a microscopic protective film on surfaces and has built-in pH buffering compounds. It controls formation of hard scale deposits.

EVEPORATOR TREAT
Prevention of scale in Evaporators
Used in both high and low pressure evaporators to prevent foaming, carry-over and scale formation. It’s safe to use where distillate is used for drinking purposes. It prevents scale formation and avoids the need for acid descaling.

Images: Alt


CAT Sulphite 25 Ltr

Size:

Color:

Product Short Description: Liquid sludge conditioner designed to prevent deposits.DOSES : The initial dosage is 20 ml of treatment daily for every ton of boiler capacity. Bottom blow down is required daily when using Boiler Coagulant.
Product Technical Specification:
Remarks:
Images: Alt


Boiler Coagulant Sludge Conditioner

Size:

Color:

Product Short Description: Boiler Coagulant prevents the formation of deposits on boiler internal surfaces. Sludge is kept dispersed in small particles and conditioned to be removed by normal blowdown.
Product Technical Specification:

Appearance: Clear, viscous liquid

Specific Gravity at 25° C (77° F): 1.0

pH: 6.9 - 10


 

Remarks:

RXSOL-50-5003-025 eliminate light oil contamination, A concentrated solution of surface-active polymers which is use as an internal sludge conditioners in boilers. Boiler Coagulant  is a colorless, high molecular weight solution used in both medium and low-pressure boilers (<850 psig or 60 kg/cm2) 

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Hardness Phosphate Control

Size:

Color:

Product Short Description: Phosphate Boiler Water Treatment Hardness Control is a white dry powder Phosphate Boiler Water Treatment product is used for the reduction of hardness in boilers. Hardness Control is highly soluble in water and It will precipitate calcium hardness
Product Technical Specification:

Sampling And Testing

A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Rxsol Hardness Test Kit instructions and fill the Boiler Water Log Form according to result results. It is important that regular testing is carried out to ensure levels of treatment are correct.

Physical Properties :

Appearance        :White powder
Corrosive action  :None
pH 1% solution   :8.8
Flash point         :None

Remarks:

Phosphate/pH relationship recommended to control boiler corrosion. Different forms of phosphate consume or add caustic as the phosphate shifts to the proper form. For example, addition of monosodium phosphate consumes caustic as it reacts with caustic to form disodium phosphate in the boiler water according to the following reaction:

NaH2PO4 + NaOH ® Na2HPO4 + H2O
monosodium phosphate   sodium hydroxide   disodium phosphate   water


Conversely, addition of trisodium phosphate adds caustic, increasing boiler water pH:

Na3PO4 + H2O ® Na2HPO4 + NaOH
trisodium phosphate   water   disodium phosphate   sodium hydroxide
 
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Hydrazine Hydrate 25 Kg

Size:

Color:

Product Short Description: No oxygen is entering the boiler with the feed water when hydrazine is present in the water ( This will help to decrease oxygen on HP, LP boiler )
Product Technical Specification:

Physical properties 

Molecular formula: H2NNH2
CAS No.: 000302012
Molecular weight: 32.05
Description: colorless, oily liquid, fuming in air.
Odor: penetrating odor resembling that of ammonia
Density: 1.0036 (25/4°C)
Boiling point: 113.5°C (at 760 mm Hg)
Freezing point: 1.4 - 1.5°C
Explosive limits: 4.7 - 100% by volume in air
Flash point: 38 - 52°C (open cup)
Saturation concentration: 18900 ppm
Conversion factors: 1 ppm = 1.31 mg/m3
(at 760 mm and 25°C) 1 mg/m3 = 0.76 ppm
Solubility: soluble in water, ethanol, and isobutanol; insoluble in chloroform and ether
Vapor density: 1.04 (air = 1)
Vapor pressure: 14.4 mm Hg at 25°C
 
Remarks:

Hydrazine is used as an oxygen scavenger for high pressure boilers in power plants and other industries to reduce corrosion of metal pipes and fittings. Hydrazine Test Method, in which several solutions have been formulated as a Hydrazine Reagent. The method is both sensitive and easy to perform. It is used mostly for the determination of small amounts of hydrazine in boiler feedwater. 

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Sodium Bisulphate

Size:

Color:

Product Short Description: sodium hydrogen sulphate
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


SODIUM SULFIDE ( Sulphide )

Size:

Color:

Product Short Description: SODIUM SULPHIDE
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Boiler Water Log Sheet

Size:

Color:

Product Short Description: Boiler Water Log Sheet
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Boiler Water Treatment Autotreat

Size:

Color:

Product Short Description: Autotreat is a boiler water conditioner designed for optimum protection of boiler systems when used in conjunction with Oxygen Scavenger Plus. This well known phosphate treatment with new polymer technology. which helps to keep precipitates soft and
Product Technical Specification:

Autotreat is a specialized boiler water conditioner engineered for maximum system protection. It combines proven phosphate treatment with advanced polymer technology. The formulation ensures scale and sludge remain soft and non-adherent. Easier removal through blow down improves operational efficiency. When used with RXSOL Oxygen Scavenger Plus, it provides complete boiler protection.

  • Advanced phosphate–polymer blend for superior conditioning
  • Keeps deposits soft, loose, and easy to remove
  • Enhances efficiency and reduces maintenance costs
  • Works synergistically with RXSOL Oxygen Scavenger Plus for full system protection

TOTAL BOILER PROTECTION
 

Why Choose Boiler Water Treatment AUTOTREAT?

Boiler Water Treatment AUTOTREAT Boiler Water Treatment Chemical provides reliable all-in-one protection against scale, corrosion, and sludge, making it an ideal choice for marine and industrial boiler systems. It improves efficiency, reduces maintenance costs, and ensures safe boiler operation.

Keywords:

AUTOTREAT Boiler Water Treatment Chemical, Boiler Water Treatment Chemical, Marine Boiler Chemical, Industrial Boiler Chemical, Boiler Scale Inhibitor, Boiler Corrosion Inhibitor, Boiler Sludge Conditioner

Remarks:

Boiler Water Treatment Chemicals Full range ::: https://rxchemicals.com/Boiler-treatment-chemicals-INDIA-One-Stop-Boiler-Maintenance-Solutions

 

Marine Chemicals Full Range ::: https://marinechemical.in/marine-chemicals-full-range

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


BWT MULTI PLUS 25 Ltrs

Size:

Color:

Product Short Description: Blend of New generation polymer, phosphate, and alkalinity booster to control scale and corrosion in the boiler.Water conditioner Multi Purpose BWT is multi-functional boiler water Treatment formulated to be used in conjunction with RXSOL OXYTREAT
Product Technical Specification:

Sampling And Testing

A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Fill the Boiler Water Log Form according to result. It is important that regular testing is carried out to ensure levels of treatment are correct.

Physical Properties :

Appearance        :Liquid
Corrosive action  :None
pH 1% solution   :8.8
Flash point         :None

Remarks:

Phosphate/pH relationship recommended to control boiler corrosion. Different forms of phosphate consume or add caustic as the phosphate shifts to the proper form. For example, addition of monosodium phosphate consumes caustic as it reacts with caustic to form disodium phosphate in the boiler water according to the following reaction:

NaH2PO4 + NaOH -> Na2HPO4 + H2O
monosodium phosphate   sodium hydroxide   disodium phosphate   water


Conversely, addition of trisodium phosphate adds caustic, increasing boiler water pH:

Na3PO4 + H2O -> Na2HPO4 + NaOH
trisodium phosphate   water   disodium phosphate   sodium hydroxide
 

 

Images: Alt

Who's online

There are currently 0 users online.